Dream ViewDream View
All articles
Payments

Sending Money to China for Business: SWIFT, Yuan or a Payment Agent — What to Choose and What to Check

Sending money to China for business: SWIFT in USD or CNY, a payment agent or a letter of credit — which to choose, which details to verify, where payments get stuck.

· Chief Operating Officer (COO)Published: 17 min read
Sending money to China for business: SWIFT, yuan and payment agents — Dream View

“How do I send money to China” sounds like a technical footnote — until $40,000 hangs between two banks three days before shipment, or you discover the bank details in an email belong to someone other than the factory. This guide is for buyers who source from China at $15,000–150,000 per order and want to know not how to fill in an online-banking form, but which channel to choose for their deal and what to verify before pressing the button.

The definition in one paragraph: an international payment to China is a transfer from the buyer’s account to the account of the Chinese selling entity through the SWIFT bank network (in dollars, euros or yuan), through a payment agent, or through documentary instruments such as a letter of credit. But choosing the channel is really a decision about speed, cost and prepayment protection, and each option has its own weak point.

We have already covered protecting the payment from fraud and the 30/70 structure separately: how to pay a Chinese supplier safely and letter of credit, escrow or 30/70. This article is about the mechanics of the money itself: which channel to use, in which currency, and where payments most often stall.

Duty and VAT rules depend on your destination country; the payment mechanics below apply wherever you import.

Four payment channels: which one fits your deal

Business money reaches China by one of four routes. There is no universal best — only the best fit for order size, the payer’s country and the relationship with the supplier.

Channel Best for Strength Weak point
Bank SWIFT in USD/EUR The default for orders of $15,000+ Familiar to factories, full document trail Intermediary banks, fees, time to credit
SWIFT / transfer in yuan (CNY) When the factory prices in yuan or discounts for CNY No conversion on the receiving side Needs a yuan route at your bank, or you get double conversion
Payment agent No direct route from your country or company Solves access, handles the Chinese side An extra link: rate, fee, the agent’s own risk
Letter of credit / escrow Large sums, a new supplier Money moves only when conditions are met Costlier, slower, document-heavy

For a typical furniture, tile or plumbing order of $30,000–100,000, a workable setup is SWIFT to the factory’s corporate account in tranches (deposit, balance before shipment), each tied to a control step: a sample and a pre-shipment inspection. A letter of credit or escrow is brought in when the sum is large and the supplier is new.

SWIFT: how the payment travels and where it gets stuck

SWIFT is not the transfer of money itself but a messaging system between banks. If your bank has no direct correspondent relationship with the beneficiary bank, the payment passes through one or more intermediaries, and each may deduct a fee and screen the payment.

The path looks like this: your bank → correspondent bank (often in the US, Europe or Hong Kong) → the beneficiary’s Chinese bank → the factory account. Hence the typical places a payment hangs:

  • Data mismatch. The beneficiary name is written differently from the Chinese bank’s records (Latin letters instead of characters, an abbreviation instead of the full name). The bank returns the payment or asks for clarification — that is days.
  • Vague payment purpose. “Payment per invoice” with no number or goods description raises compliance questions. Include the invoice and contract number and the subject (for example, “furniture, per contract No. …”).
  • Intermediary fees. With the OUR option the sender pays all charges and the beneficiary receives the full amount; with SHA/BEN the factory receives less and you must top up. For invoice payments, choose OUR almost always.
  • Cut-off and holidays. A payment after the cut-off time goes out the next banking day; before Chinese holidays processing stalls for several days. See the China holiday calendar for buyers.
  • Document requests. A bank may ask for the contract, invoice or specification. If they are not at hand, the payment waits.

Practical rule: send the first payment to a new factory as a small tranche and wait for confirmation of credit before sending the main amount. It is cheaper than chasing a missing large sum.

Dollars or yuan: how to decide

Factories invoice mostly in USD but can usually restate in CNY on request. The question is not which is more popular but where you lose on conversion.

Pay in USD if your account is in dollars, the factory is used to dollars and the price is fixed in the contract. The advantage is a clear price and no currency risk between signing and payment.

Pay in CNY if:

  • the supplier will discount for settlement in yuan (ask directly);
  • your bank or payment partner can process yuan without double conversion (USD → EUR → CNY is the worst case);
  • the order is anchored to yuan prices and you want to remove the risk of the yuan strengthening.

Compare the total debited from your account, not the rate on a tidy-looking calculator. Ask your bank or agent for the exact debit for $10,000 in both variants — the difference in rate margin and fees is often larger than expected. China’s foreign-exchange rules are set by SAFE; in practice that means the payment to the factory must be backed by a real trade transaction with documents.

Payment agents: when they make sense and how not to get burned

When your company or bank has no workable route to China, an agent remains. They receive funds in your country and make the payment in China from their side. It is a legitimate tool if the agent is transparent and a dangerous one if you are paying “a person in a chat”.

Check before the first payment:

  1. The contract. With a legal entity, in a language you read, with liability for a lost payment stated.
  2. Rate and fee. A rate fixed at the moment of receipt or a formula; the fee as a separate line, not a margin buried in the rate.
  3. Closing documents. Proof of payment to the supplier (SWIFT copy, payment order) showing exactly your factory’s name.
  4. Where the money sits. Between receipt and sending — is it a segregated account?
  5. Timing. A realistic term, with a stated start of the clock.

Rule: a payment through an agent must end at the account of the supplier entity named in your contract. If the agent suggests sending it “to a different beneficiary, it is simpler” — stop.

For readers in Russia: Dream View does not arrange payments or logistics into Russia. We source and inspect goods on FOB / EXW China terms; the lawful payment route is a matter for your bank and jurisdiction under current law. We do not advise on circumventing restrictions.

From Dream View practice: what we verify before every payment

Below is the process checklist our team uses before each transfer on an order. It is a sequence of actions, not figures.

  1. Beneficiary name in the payment = seller name in the contract and invoice, letter for letter. We check both the Chinese characters and the Latin spelling.
  2. Account number and SWIFT/BIC are matched to the signed contract, not to the latest email.
  3. Any change of bank details is confirmed by a second channel (a call to a previously known number). An email with “new details” and no call is not executed.
  4. Each tranche is tied to a stage: deposit after contract signing and sample approval; balance after inspection and before shipment. The terms are written into the contract with Incoterms.
  5. The payment purpose contains the contract number, invoice number and the subject.
  6. Confirmation of credit — the factory confirms receipt, we match amount and date.

This check takes minutes and closes the most common cause of lost money — swapped bank details.

A typical mistake: “urgent new bank details” before shipment

An anonymised case from typical sourcing practice. A buyer is running a furniture order with 70% due after inspection. The day before payment, an email arrives from the “factory manager”: the bank has changed, pay to this account. The sender domain differs by one letter. Rushing to make the cut-off, the buyer sends the balance to the new account.

A week later the factory says the balance has not arrived, and the goods sit in its warehouse. The money went to a third party and cannot be recovered quickly. What was missing: matching the details to the contract and a call to a known number. One phone confirmation would have taken five minutes.

Lesson: urgency plus “new details” is always a reason to stop. More on mail-interception schemes in the safe payment guide.

How to split payments across order stages

Tie money to events you can verify, not to the factory’s timelines. Typical logic:

Stage Verifiable event What we pay
Contract signing Contract and specification signed, bank details matched Deposit (a share of the order value)
Sample Golden sample approved Usually no separate tranche
Batch ready AQL inspection passed, report received Balance before shipment
Shipment Bill of lading / documents in hand Closing any remaining contract obligations

The exact deposit and balance shares are agreed in the contract per category and supplier; there is no universal figure. The key point: the balance is not sent until the inspection report is in. More on checks in our guide to quality control in China.

What a payment really costs: the components

The cost of a transfer is more than one line. It consists of:

  • your bank’s fee for an outgoing international transfer;
  • intermediary bank fees, if the option leaves them to the beneficiary;
  • the exchange-rate margin on conversion (the least visible part);
  • the agent’s fee, if one is involved;
  • the Chinese bank’s fee for crediting.

Tip: before the first payment ask the bank or agent for “how much will be debited so that the factory receives exactly X”. Compare options on that one figure. The effective cost often matters more than the nominal fee.

In purchase economics, payment costs are a small item next to freight and duty, yet they are the item most likely to erase the expected saving if the wrong channel is chosen. How to total it up — see how to calculate sourcing profitability.

Which documents to keep at hand

A bank or compliance team can ask for proof of the deal at any moment, and a payment without papers waits. Assemble the set before the first transfer:

  • The contract with party details, subject, price, delivery terms under Incoterms and a payment schedule (see how to draft a contract with a Chinese supplier);
  • A proforma invoice with number, date, line items and total — the payment purpose should refer to it;
  • A specification with article numbers and quantities matching the invoice;
  • Proof of payment (SWIFT copy or payment order) that you send to the factory so it can find the credit;
  • Closing documents after shipment: commercial invoice, packing list, bill of lading — needed both for customs and for your accountant.

If a factory asks you to pay “with no contract, per chat”, that is not saved time but lost protection: you can neither recover a deposit nor prove the terms.

What to do if a payment is stuck or returned

Delays happen even with correct details. The sequence:

  1. Get the SWIFT confirmation with the unique transaction reference (UETR, if your bank provides it) and ask the bank for status and the current location of the payment.
  2. Do not send a second payment until you know the fate of the first — otherwise you risk paying twice.
  3. Tell the factory and ask it to check incoming funds at its bank: sometimes the money has arrived but has not been matched.
  4. If the payment was returned, learn the reason (data, purpose, document request), correct it and resend with an explanation.
  5. Build a buffer into the shipment schedule: the balance should be paid with margin, not on the last day before the vessel cut-off. See how payment timing affects departure in our sea freight guide.

A good habit is a single payment register per order: date, amount, currency, channel, transaction number, status. With several orders in flight, it saves you from confusion.

Final checklist before you pay

  • The contract is signed and names the seller entity and bank details.
  • The factory name in the contract matches its business licence (see how to verify a supplier).
  • The bank details are confirmed through a second channel.
  • Currency is chosen and the total debit has been calculated in advance.
  • The charges option is set (OUR for invoices where the factory must receive the full amount).
  • The payment purpose contains the contract and invoice numbers.
  • For a new factory, the first payment is a test tranche.
  • The payment is not scheduled for Friday evening or just before Chinese holidays.
  • The balance is tied to inspection, not to a promise.

Payments under Dream View control

We work for a fee fixed in the contract before work starts, which covers supplier search and vetting, samples, a contract with Incoterms, staged payment, pre-shipment AQL inspection and door-to-door logistics (for Thailand, the UAE, Indonesia, Kazakhstan and the EU). The minimum volume is from $100,000 a year. Savings versus local prices by category: furniture up to 80%, tile and stone up to 70%, plumbing up to 60%, kitchens and fronts up to 50%, almost any item from 20%.

Want your payment not to hinge on a single email with bank details? Write to orders@dreamviewchina.com, message us on Telegram t.me/dreamviewchina or call +66 80 942 2230 — we will give you a free estimate of your order and propose a payment structure for your category and amount.

Frequently asked questions

How do I pay a Chinese supplier so the payment actually arrives?

The most predictable channel for a wholesale order is a bank SWIFT transfer to the corporate account of the selling company, whose name matches the contract and invoice. Before sending, verify the full beneficiary name, account number, bank SWIFT/BIC and payment purpose, and confirm any new bank details through a second channel (a call to a number you already had).

Is it better to pay China in dollars or yuan?

It depends on where your account is and how you convert currency. The dollar is the usual invoice standard and rarely raises questions at factories. The yuan (CNY) helps if the factory discounts for local-currency settlement or your bank has a clean yuan route without extra conversion. Compare the total debited from your account — exchange rate, bank and correspondent fees — not just the face amount.

Can I pay a Chinese factory to a personal card or via WeChat/Alipay?

Not for a wholesale order. A payment to an individual or a personal wallet is not protected by a contract, leaves poor closing documents and is the first red flag in supplier checks. Pay the legal entity named in the contract. The exception is small samples on marketplaces with built-in buyer protection.

What is a payment agent and when do you need one?

A payment agent receives your money in one country and pays the supplier in China. You need one when your bank or company has no direct route to China, or when the supplier insists on yuan. The risk is one more link in the chain: check the agent's contract, licence in their jurisdiction, rate transparency and closing documents.

How long does an international transfer to China take?

Usually from one to several banking days, but it depends on intermediary banks, cut-off times, Chinese holidays and whether documents are requested. Build in a buffer: a payment sent on a Friday or just before a Chinese holiday can take a week or more to credit.

Why would a transfer to China be returned or frozen?

Most often because of mismatched data (beneficiary name versus account), a vague payment purpose, a compliance request for a contract or invoice that is not supplied, or an issue at an intermediary bank. Write the payment purpose concretely and keep the contract, invoice and specification at hand.

Sources

  1. ICC — Incoterms 2020(iccwbo.org)
  2. State Administration of Foreign Exchange of China (SAFE)(safe.gov.cn)
  3. People's Bank of China(pbc.gov.cn)
Related services
Get an estimate